Built for maximum versatility, the E10P input section will easily handle microphone or line level inputs through the XLR / TRS Combi-jack. Bass and Treble EQ in addition to Level control and a Mic/Line input gain selector ensure the E10P can handle virtually any audio source. A Live/Playback EQ preset selector, a 100Hz/50Hz low-frequency Roll-off selector (no crossover needed for subs), a full-time Limiter with LED indicator, a Clip LED, a Link output ensure the E10P can adapt easily to any audio application including use as a front-of-house PA loudspeaker, as a personal wedge monitor or as a single unit micro PA for a paging and playback system (no additional mixer required).
A lightweight, low-noise 300-Watt Class-D amplifier drives the low frequency 10-inch woofer while a two-tier 50-Watt amplifier capable of delivering an exceptionally clear and linear high-frequency response powers the 1-inch horn. An on-board active DSP based crossover ensures that the woofer and horn operate optimally while protecting the high quality speaker components.
The E10P features a powerful yet lightweight 10-inch low-frequency driver with a neodymium magnet, a silky-smooth 1-inch horn and driver and an enclosure built from voidless 15mm multi-ply Baltic birch for light weight with classic Elite ruggedness. That durability is engineered into the multi-angle enclosure pioneered for the Elite line that enables the E10P to operate vertically on a stand or horizontally as a stage monitor. For added convenience, the E10P easily converts between 120VAC, 230VAC or 240VAC.
Today’s élites, from the highly efficient two-way E10 to the 1500 watt E2152 have some of the most advanced component protection and crossover technology available today. They have been carefully designed to bring you the latest in Yorkville’s advanced loudspeaker engineering.
Ideal for any small PA rental house, installer or sound company, these loudspeakers may replace a number of specific application cabinets in any inventory.
A modified trapezoidal shape and recessed input jack panel and handles mean these cabinets can function perfectly as a wedge monitor or front-of-house loudspeaker. Unlike some ‘multi-function’ loudspeakers currently in the marketplace, great care has been taken in the design process to ensure that élite cabinets will perform without compromising functionality as either a monitor or a front-of-house enclosure. Neither application was considered as an afterthought.
Several of the élite loudspeakers are loaded with 80° x 50° rotatable ABS Waveguide horn assemblies (the E10 utilizes a 100° x 25° horn). The ability to rotate the horn assembly ensures that the cabinet can provide optimum high frequency dispersion when the loudspeaker is used in either a vertical, horizontal or arrayed application.
Integrated stand mount adapters and flyware means these enclosures can be utilized in any permanent install or touring application. In addition, the modified cabinet shape means the élite series can be installed much closer to vertical surfaces and in some cases, under balconies in tight locations, and can be arrayed in a much tighter less obtrusive cluster.
Of course, the élite series has retained the features and high quality sound that have made them so popular including Yorkville's famous two year (even if you break it!) transferable warranty.*
Advanced technology
Advanced PTC™ Horn Protection makes its debut in the élite series. PTC™ is an ingenious current sensing / self resetting breaker that offers some serious advantages over current protection schemes used in many loudspeaker cabinets. This protection scheme, while always present in the signal path, remains inaudible until it becomes necessary for it to react. It kicks in at a point where it effectively reduces output to the horn and protects that diaphragm from damage due to excessive power input or signal distortion. Unlike a breaker it does not require a physical reset to allow signal back to the horn driver, and unlike a bulb or fuse, does not need to be replaced if the circuit is tripped, and the fuse is blown.
Where PTC™ shines is in heavy feedback environments where most horn diaphragm damage occurs. In rare situations even where a microphone might be dropped in a monitor, the sustained ‘squeal’ can destroy diaphragms in seconds. PTC™ will significantly reduce output level to the horn to protect the diaphragm. When the situation has been rectified, and the feedback eliminated the horn will return to full operating level within half a second.
The E2152 features the ATP™ (Active-Transistor) protection system, which allows the horn driver to operate at levels significantly above those required for normal operation. The ATP™ brickwall element of the protection circuit uses power transistors configured to operate linearly yet have the fast attack required to protect against harmful transients. Along with ATP™, the crossover also incorporates air core coils and polypropylene capacitors to guarantee reliable and distortion free operation at extreme levels. The sonic benefit is higher output and greater transparency when operating at high levels.
Rugged Driver Mounting System All élite cabinets feature a specially reinforced driver mounting system that makes sure the horn drivers will still be attached to the horns when you get to the show. The ABS or composite horns are pressure fitted to the driver which is bolted to the internal driver support.
Custom Design Horns Custom ABS plastic and composite horns are specifically designed for each cabinet and manufactured right in our factory for optimum quality control. This insures proper waveguide output for better clarity and lower distortion.
Rugged Black Carpet Covering The stylish yet practical carpet that covers the élite cabinets keeps them looking great. The two part rubberized glue that is used to attach the carpet ensures that élite cabinets will stand up against moisture by effectively wrapping the cabinet in a rubber glove.
Curved Metal Speaker Grilles Curved metal grilles absorb shocks evenly to resist dings and dents while eliminating frequency resonance. The trapezoidal cabinet shape allows for arrayable performance without phase cancellation.
Recessed Handles All élite cabinets feature attractively recessed bar handles. Great care is taken to make sure that they "stay out of the way", but are easy to get at when you need them.
Flush Mounted Stand Adapters Flush-mounted stand adapters in the top of the subs and bottom of the full-range speakers allow the use of the adjustable SW-TELETUBE option which makes setup a breeze by eliminating the need for speaker stands.
Integrated Wheels Tilt back wheels and top-mounted handles are standard issue on the larger cabinets such as the E215, E2152, LS1208 and LS1004.
* Warranty valid in U.S.A. and Canada only
