Legacy Series - NX12

250w, 12-inch / 1-inch Speaker

NX series enclosures are manufactured using tough, light weight, low resonance variable density composite materials. In addition they are UV and moisture resistant. Stand mount and flying hardware are included. In addition the enclosure itself has been molded for maximum versatility. The trapezoid box is ideal for mounting in arrays, or for use as a monitor, with recessed input jack plate and an ideal wedge monitor angle that was taken into account in the initial design.



  • Ultra-light variable density acoustic foam construction
  • Dual purpose full range and wedge monitor format enclosure
  • Ultra-clear reproduction throughout bandwidth
  • Ultra-high efficiency performance requires less power for more output
  • Ceramic Magnet Woofers
  • High quality 1" High Frequency drivers
  • Next generation woofer / driver / horn technology
  • Integrated flying hardware (3/8" threaded holes)
  • Tough, full length metal grille
  • Recessed Input panels
  • CTL™ (current to light) HF protection system


The NX20 molded loudspeaker is rapidly becoming the most successful loudspeaker cabinet in Yorkville's history. Variable density lightweight composite construction and innovative design make it the natural choice for any customer needing a versatile, good sounding loudspeaker solution.

The NX12 is a 250-watt ceramic magnet speaker version on the NX20, a more cost-effective solution for the end-user customer where price is a consideration.

This easy to move 33 pound (15kg) loudspeaker is finished in an unobtrusive flat black that is great for low visibility in clubs, churches or restaurants. The unique enclosure design means the NX12 can easily be used as a front of house PA loudspeaker, or as a wedge monitor.

The NX12 comes equipped with flying hardware and has an incorporated stand mount adapter. It also features our tried and true CTL™ (current to light) protection system on the high frequency driver.

With the optional steel U-Bracket flying assembly (NXF100) the NX Flyware System can also be utilized for either wall mounting (using the NXF105 Wall Mount Bracket) or flown as a linked array system (with the NXF110 Array Link Assembly) allowing up to six cabinets for a full, circular array.


System Type Two way
Active or Passive Passive
Power Rating (Watts) 250
Nominal Impedance (Ohms) 8
Sensitivity (dB @1Watt/1m) 97
Max SPL (dB) 121
Frequency Response (Hz +/- 3dB) 70 - 18k
Crossover Frequency (Hz) 2500
Driver Configuration 12 inch / 1 inch
HF Driver(s) 1 Inch Throat, Ceramic Magnet, 1 Inch voicecoil
HF Dispersion (°H x °V) 90 x 40
HF Protection CTL™
LF Driver(s) 12 Inch, Ceramic Magnet, 2 inch voicecoil
Inputs - 1/4" Jacks 2
Inputs - Speakon 4-pin 1
Bar Handles 1 (Side)
Optional Flying Hardware 2 (Top) 2 (Side)
Pole Mount Adapter (1 3/8"-3.5cm) Yes
Enclosure Materials Variable Density Molded Composite
Grille Perforated Metal
Dimensions (DWH xbackW, inches) 14 x 16 x 24 x 7.5
Dimensions (DWH xbackW, cm) 36 x 41 x 61 x 19
Weight (lbs/kg) 34 / 16

Specifications subject to change without notice