Legacy Series - PS110P
200w, 10-inch Powered Sub
The amazing PS110P subwoofer, though small in size (with a single 10 inch driver), contains a 200 Watt PGM power amplifier and packs a serious punch for rock-solid bottom end.
Features
All Pulse subwoofers, except the PS218P feature a standmount adapter on top to accept a speaker pole for mounting mains on top. The Yorkville SW-TUBE or adjustable SW-TELETUBE is recommended for this purpose.
Pulse powered sub woofers all accept line or speaker level input with parallel inputs to allow material to pass through to mains.
Overview
Specifications
| System Type | Subwoofer |
| Active or Passive | Active |
| Power Rating (Watts) | 200 |
| Max SPL (dB) | 125 |
| Frequency Response (Hz +/- 3dB) | 50 - 110 |
| Driver Configuration | 10 inch |
| LF Driver(s) | 10 inch |
| LF Protection | Clip, Over Current, Dynamic Thermal |
| Total Power (Watts) | 200 |
| LF Power Amplifier (Watts) | 200 |
| Cooling Scheme | Passive Convection |
| Power Cable | Yes |
| Power Switch | Yes |
| Inputs | 2 |
| Inputs - 1/4" Jacks | 2 |
| Level Controls | Volume |
| Other Controls / Features | Selectable line or speaker level input Ground lift switch |
| Feet | Plastic Glides |
| Bar Handles | 2x side mounted |
| Pole Mount Adapter (1 3/8"-3.5cm) | Yes |
| Enclosure Materials | 3/4 inch 7 ply plywood |
| Grille | Heavy gauge, black, anti-resonance curved metal |
| Covering / Finish | Blue Carpet |
| Dimensions (DWH xbackW, inches) | 27x17.5x14 |
| Dimensions (DWH xbackW, cm) | 69x44x36 |
| Weight (lbs/kg) | 53/24 |
Specifications subject to change without notice