The ultra-compact 150-watt Yorkville YSS2 active studio subwoofer is the ideal companion for any DAW, project or midi studio where additional bottom end in the monitoring system is required, yet space may be at a premium. Designed for easy hook-up to any source, the YSS2 offers stereo RCA In/Outs for connection between mixer and active monitors, as well as speaker push-terminal In/Outs for connection between power amplifier and passive monitors. In either case, the stereo inputs are internally summed to mono for the YSS2's power module.
Rear panel features on the YSS2 include a Level control, a Phase inversion switch and a 50 to 200Hz "Crossover" control for low-pass filter regulation of the YSS2's upper frequencies so that it can be matched with the natural bass-rolloff of full-range monitors. The back panel also features a 3-postion power switch with an Auto setting that instantly powers up the YSS2's amplifier when signal appears at either the RCA or speaker-tab inputs.
System Type | Studio Subwoofer |
Active or Passive | Active |
Power Rating (Watts) | 150 |
Max SPL (dB) | 105 |
Frequency Response (Hz +/- 3db) | 45 - 300 |
LF Driver(s) | 10-inch ceramic magnet driver |
LF Power Amplifier (Watts) | 150 |
LF Distortion | Less than 0.05% |
Power Cable | IEC Detachable |
Power Switch | Yes |
Inputs | 2 x RCA (L&R) / 2 x Speaker push terminal (L&R) |
Mixer Controls | Level High Pass Filter Frequency Phase Auto On |
Other Controls / Features | Thru Puts: 2 x RCA (L&R) / 2 x Speaker push terminal (L&R) |
Feet | Yes |
Dimensions (DWH xbackW, inches) | 15 x 14.5 x 15 |
Dimensions (DWH xbackW, cm) | 38 x 37 x 38 |
Weight (lbs/kg) | 37 / 17 |
Specifications subject to change without notice