Studio Monitors Series - YSM6-2
Yorkville Sound's YSM SERIES II Powered Studio Monitors are engineered to deliver the uncompromising clarity your mixes demand. Designed with project and professional studios in mind, the YSM SERIES II has been developed to be the best-sounding monitor in its class.
Features
- 6-inch low-frequency driver; 1-inch silk dome tweeter
- Balanced XLR and 1/4- inch TRS inputs
- Unbalanced RCA input
- High and Low Frequency Adjust Controls
- Built in HF and LF limiters
- Volume Control
Overview
The YSM6-2 features 1-inch black-silk diaphragm neodymium dome tweeters. These tweeters blend seamlessly into the specially designed low-diffraction waveguide which is integrated into the front baffle. The edges of the wave-guide perfectly couple the tweeter with the woofer, reducing sonic anomalies normally associated with driver/tweeter proximity. The fibre-reinforced composite cone woofers have also been designed to perform with sonic excellence, providing a wide dynamic range at all levels. Integrated DSP is utilized to deliver transparent signal processing and bi-amplification has been optimized for each driver. The woofer and tweeter have been perfectly time aligned to eliminate any phase irregularities usually associated with 2-way designs.
Specifications
| System Type | 2-Way |
| Active or Passive | Active |
| Power Rating (Watts) | 75 |
| Biamp Operation Only | Yes |
| Max SPL (dB) | 105 |
| Frequency Response (Hz +/- 3db) | 45Hz-22kHz |
| Crossover Frequency (Hz) | 2.1 kHz |
| HF Driver(s) | Neo Soft dome Ferro Fluid |
| HF Power Rating (Watts) | 25 |
| HF Protection | Therm, Over voltage, Clip |
| LF Driver(s) | 6.5-inch composite |
| LF Power Rating (Watts) | 50 |
| LF Protection | Therm, Over voltage, Clip |
| HF Distortion | 0.015 |
| LF Power Amplifier (Watts) | Class D |
| LF Distortion | 0.01 % |
| Cooling Scheme | convection |
| Power Cable | Included |
| Power Switch | Back, with LED on Baffle |
| Inputs | 1 RCA |
| Inputs - 1/4" Jacks | 1 |
| Inputs - XLR | 1 |
| Input Sensitivity (Vrms Sine) | 1.2 |
| Level Controls | 1 |
| LED Indicators | power on front |
| Enclosure Materials | MDF |
| Baffle Material | MDF/ABS |
| Covering / Finish | Textured Vinyl |
| Dimensions (DWH xbackW, inches) | 10 x 9.5 x 15 |
| Dimensions (DWH xbackW, cm) | 25.4 x 24.13 x 38.1 |
| Weight (lbs/kg) | 15 / 6.8 |
Specifications subject to change without notice